Перегляд за Автор "Bashta, Oleksandr"

Зараз показуємо 1 - 8 з 8

Arched transmissions teeth geometry within offset of initial profile
(2019) Nosko, Pavlo; Bashta, Oleksandr; Lysenko, Аndrii; Tkach, Pavlo; Bashta (Sheremet), Alla
There has been researched teeth geometry of cylindrical arched teeth gears, cut with rod instrument, teeth of which profiled by arbitrary curve in normal cross-section and in linear direction within initial profile offset. Toothing of instrumental rod with arched teeth with gears within initial profile offset is an analogue of the process of cutting teeth with rod instrument by means of enveloping. Surfaces of gear teeth within toothing with rod are enveloping of teeth surfaces of the last one. If teeth surfaces of instrumental rods for cutting pinion teeth and gear are non-congruous, then we have case of dotty toothing of pinion and gear. If initial profiles are non-congruous, then contact dot moves from one side of the tooth to another. It was obtained equations of teeth surfaces, while writing down coordinates of toothing surfaces in coordinate systems X1Y1Z1 and X2Y2Z2, connected with pinion and gear. While making such a transition, we have equations of surfaces of convex side of pinion teeth and concave side of gear teeth. In common case those equations are equations of helical lines of variable pitch. These equations can be used within the determination of toothing field borders, appropriate to the tops of the pinion and the gear teeth. Within this case two types of toothed gears with arched teeth will differ: gears with symmetric arched teeth (teeth are symmetric relatively to the plane XOZ and asymmetric arched teeth (working area of teeth surface is situated from one side of plane). Received results can be used within the determination of indices of loading ability and other characteristics of cylindrical arched transmissions with generalized teeth geometry within initial profile offset.
Design of worm gears with optimal geometric parameters based on minimization of loses in gearing
(2018) Tkach, Pavlo; Nosko, Pavlo; Boyko, Grygory; Bashta, Oleksandr; Bashta (Sheremet), Alla
The mathematical model of definition of losses in gearing worm gears and their de-crease on 10 … 15 % is stated at definition on the basis of planning mathematical experiment of rational parameters of transfers.
Efficiency of using of the mineralized malts composition for the enhancement of food products by micronutrients
(2019) Bashta (Sheremet), Alla; Ivchuk, Nadiya; Bashta, Oleksandr
In the whole world there is a deficit of micronutrients, which leads to the development of various diseases. The purpose of research is to obtain and investigate the composition of malts with high content of deficient micronutrients and enrichment with selected raw materials the rye-wheat bread.The subject of research is malt of cereals (maize and oat), salts of chromium and zinc, mineralized malt, rye-wheat bread enriched with the composition of mineralized malts. X-ray fluorescence analysis was used to determine the mineral composition of grain and malt and stripping voltammetry method to determine the zinc content.The addition of such mineralized raw materials to food products formula will enrich them with biologically active substances, giving them functional properties.
Improved and extreme geometro-kinematic parameters of high-loaded hyperboloid gears
(2019) Nosko, Pavlo; Kashkarov, Sergii; Bashta, Oleksandr; Tsibriy, Yurii; Bashta (Sheremet), Alla
Creation high-loaded hyperboloid gears with improved and extreme geometrykinematic parameters on the basis of quasi hyperboloid gearings – a perspective and effective direction in increase of technical and economic characteristics of reducers. Use of any reserves in manufacture hyperboloid gears and reducers can give and already really gives considerable economic benefit at the expense of improvement of a design, increase of labor productivity, improvement of quality, decrease in the cost price, increase of competitiveness of production.
Progress on ICAO’s Strategic Objectives and Global Safety Plans. Pandemic safety challenges
(2022) Bashta, Oleksandr; Nosko, Pavlo; Bashta (Sheremet), Alla; Povzun, Oleksandr
Alleviations to the Standards of the Annexes and its associated system – CCRD, were established as interim measures to support continued operations during the initial stages of the COVID-19 pandemic. However the CCRD system for filing alleviations has been closed and replaced with planning tools, approaches and guidance for the recommencement of operations in line with the requirements of the SARPs.
Rationale of fruit and berry raw materials choice to increase the confectionery nutritional value
(2021) Bashta (Sheremet), Alla; Ivchuk, Nadiya; Stetsenko, Natalia; Bashta, Oleksandr
The results showed the suitability of fruit and berry raw materials, including non-traditional wild, involving in the manufacturing of health products. Результати показали доцільність залучення при виробництві продукції оздоровчого спрямування плодово-ягідної сировини в тому числі і нетрадиційної дикорослої.
Study of the dynamics of spindle shaft on gas-static bearings
(2024) Breshev, Oleksii; Nosko, Pavlo; Bashta, Oleksandr; Bashta (Sheremet), Alla; Radko, Maksym
This study delves into the complex dynamics of spindle shafts mounted on gas-static bearings, employing computational experiments and analysis to reveal crucial insights for optimizing high-precision machining processes
Yacón and Scorzonera as functional enrichment of food
(2015) Bashta (Sheremet), Alla; Ivchuk, Nadiya; Bashta, Oleksandr
The aim of this work was to determine the polysaccharides composition such non-traditional plant materials as Salsify and Yacón and enrichment of food with selected raw materials.