Статті
Постійне посилання колекціїhttps://dspace.nuft.edu.ua/handle/123456789/7522
Переглянути
4 результатів
Результати пошуку
Документ Water Purification from Ions of Cadmium (II) Using a Bio-Plateau(2019) Lapan, Oksana; Mikhyeyev, Oleksandr; Madzhd, Svitlana; Dmytrukha, Tetyana; Cherniak, Larysa; Petrusenko, ValentynaThe study was conducted with the purpose of experimentally developing the method of water purification from ions of cadmium (II) using a new design of a bio-plateau, which is based on the use of terrestrial plants. In order to construct the bio–plateau, the following chemically inert floating materials were used as the substrate: perlite, expanded clay, granular foam, vermiculite, cork, on top of which the seeds of higher terrestrial plants were placed. The experimental data showed that foam was the best of the tested substrates, and of plants – barley, oats, corn and rye. The constructed bio-plateau was placed into tanks with a solution of cadmium on the 9th day of incubation to study the cleaning efficiency of terrestrial plants on the aquatic environment. Determination of the residual concentration of cadmium was performed with the method of AAC at λ=228.8. As a result, it was found that rye showed the best sorption properties of the tested plants. The influence of additional aeration and pH of the medium on the degree of water purification was established. The highest treatment efficiency was observed in the variant of a bio-plateau with aeration and at a pH of 8–9. The study shows the possibility of using terrestrial plants for the phytoremediation of water bodiesДокумент Development of the hydrophytic structure of the bioplateau type for the purpose of phytoremediation(2021) Mikhyeyev, Oleksandr; Lapan, Oksana; Madzhd, Svitlana; Cherniak, Larysa; Dmytrukha, TetyanaA floating structure of a bioplateau has been developed for the purification of water bodies from the toxic substances, the biotic component of which is terrestrial plants. Chemically inert floating materials were used as a substrate for the construction of the bioplateau: perlite, expanded clay, granular foam, vermiculite, cork. Substrate testing has shown that granular expanded polystyrene is the most optimal for the usage. The study of different options for seed germination in the design of the bioplateau has shown that its placement on the top of the substrate is the best option. The usage of perlite in combination with granular foam had created an additional capillary effect, due to which the seeds germinated at a faster rate. To optimize the hydrophytic structure a grid was used, which made it possible to increase the overall density of the bioplateau. An algorithm for creating a "rolled" plant that is suitable for transportation and placement in the surface water bodies that require purification from toxic substances has been developedДокумент Determination of the dependence of the plant growth characteristics on the concentration of petrochemiscals in the soil(2021) Cherniak, Larysa; Mikhyeyev, Oleksandr; Madzhd, Svitlana; Lapan, Oksana; Dmytrukha, Tetyana; Petrusenko, ValentynaThe peculiarities of sanitary and hygienic rationing of the oil products content in environmental components were analyzed. It was established that the general ecological situation in our country and abroad is unsatisfactory and the issue of finding modern methods of standardizing the quality of environmental components, which would cover the indicators and criteria of their composition and properties, is becoming increasingly urgent. Together, it would ensure ecologically sustainable development of the biosphere in all hierarchical levels of its organization. It was established that such an assessment system does not exist today and therefore, there is no generally accepted universal method for assessing the quality of the environmental components. For this purpose, it is necessary to develop a methodology, in particular a method of biotesting, which will provide a generalized qualitative assessment of the ecological state of the environment, without being based on the quantitative characteristics of the MPC. The possibility of applying a new method of phytotesting of soil that was artificially contaminated with different types of petrochemicals in different concentrations per unit volume of soil using flax seedlings (Linum usitatissimum L.) was investigated. The growth characteristics of the test plants grown on artificially contaminated soil with petroleum products were presented. In the course of research, the possibility of studying the effect of petrochemicals on plants directly in artificially contaminated soil was confirmed. On the basis of the analysis of the obtained results, it was found that when the soil is contaminated with oil products, the aviation fuel has a greater impact on the shoots, whereas gasoline and diesel fuel have a lower impact on the roots in lower concentrations. At higher concentrations, their depressant effect is almost equalДокумент The usage of plant test systems for the determination of phytotoxicity of contaminated with petroleum products soil(2021) Cherniak, Larysa; Mikhyeyev, Oleksandr; Madzhd, Svitlana; Lapan, Oksana; Dmytrukha, Tetyana; Korniienko, IrynaThe level of phytotoxicity of the soil samples artificially contaminated with the aviation kerosene was determined in the work. The dependences of the growth characteristics of the plant test system (flax) on the excess of the approximate permissible concentrations (APC) of the oil product concentration in the soil were identified. The change in the mass of raw material depending on the level of aviation kerosene contamination of soil samples was determined. A decrease in the plant growth activity with an increase in the content of aviation fuel in the soil was established. It was found that there is a hormesis effect at certain concentrations of aviation kerosene in the soil. The comparison of the concentration dependences of the action of petroleum products on the growth rates of seedlings and their dependence on the distance to the source of pollution allowed in the latter case to conduct a kind of “dosimetry” on exposure concentrations when the petroleum product concentration was not determined