Статті
Постійне посилання колекціїhttps://dspace.nuft.edu.ua/handle/123456789/7522
Переглянути
5 результатів
Результати пошуку
Документ Effect of temperature on the process of pressing organic raw materials(2014) Rindyuk, Dmitry; Ryabokon, NataliaThe process of extrusion pelletizing particulate materials, such as sunflower and buckwheat husk, oak and pine chips, wheat straw and bran has been considered. It was investigated the effect of temperature of raw materials, compacting pressure and the diameter of the press-matrix on quality of fuel pellets.Документ Technological features of combining condensed canned milk with sugar and fruit-berry syrups during processing(2014) Ryabokon, Natalia; Rindyuk, Dmitry; Shpak, Maksim; Komisar, KseniaA mathematical model of combining milk and plant products was built on the basis of dependency of mass fraction of solids condensed canned milk (CCM).with sugar and FBS of mass fraction of solids milk-sugar mixture and the temperature of intensified lactose crystallization. Taking into consideration the rheological characteristics and constructive-technological parameters, the degree of homogeneity consistency and duration of formation of condensed milk with sugar and fruitberry syrup "cranberry-blueberry" were studied.Документ Information technology in designing high-performance equipment for biomass compacting(Rindyuk, D. Information technology in designing high-performance equipment for biomass compacting / D. Rindyuk, S. Lementar // Food and Environment Safety : journal of Faculty of Food Engineering, Ştefan cel Mare University – Suceava, 2013. – Vol. XII, Issue 2. – P. 115-122., 2013) Rindyuk, Dmitry; Lementar, SviatoslavThe basic principles and methods of constructing a mathematical model for the processes of particular materials processing are presented in this paper. An example of the practical application of the developed model in the technology of biomass extrusion, which is used for the production of fuel pellets, is considered. A mathematical model of the process for particular materials extrusion is developed and a new approach to the extrusion granulator unit design is offered with the developed methods taken as a basis. The effect of technological and design factors of extrusion granulator unit to the extrusion process regularity are also studied.Документ The method of determination of the optimal parameters of dispersed materials granulation through consolidation(2012) Rindyuk, Dmitry; Lementar, SviatoslavThe method of determination of the optimal constructive and technological parameters of dispersed materials granulation through consolidation is represented within the task of nonlinear mathematical programming. The method is based on mathematical modeling of dispersion materials extrusion through the granulator matrix holes. The method allows taking into account constructive features of technological equipment and rheological properties of the raw material.Документ The research of the influence of temperature on the рrocess of granulation by extrusion(2012) Rindyuk, Dmitry; Lementar, SviatoslavThe process of extrusion pelletizing particulate materials, such as sunflower and buckwheat husk, oak and pine chips, wheat straw and bran has been considered. It was investigated the effect of temperature of raw materials, compacting pressure and the diameter of the press-matrix on quality of fuel pellets.